• ENORM-Z-X-PM
  • GT-Lehrdorn
  • Kreissegmentfraeser
  • PunchTap
  • Speedsynchro-Modular
  • Tandemkegel
  • Cut&Form
  • EF-Hauptsitz

Application Example

A manufacturer of serial parts is milling components of 1.4301 / 1.4305 stainless steel. Due to the customer´s lack of practical experience with this material the FRANKEN engineering department was asked to suggest a process-reliable and economical tool layout.

Machine:

DMC 1035V eco

Spindle:

SK 40 / n = max. 8000 U/min

Control:

Siemens SLIMline

Tool:

TiNox milling cutter 2659TZ.016020

Cutting data:

vc = 80 m/min, fz = 0,032 mm / 0,064 mm,
ap = max. 14 mm, ae = max. 8 mm

The roughing operation previously done with an indexable milling cutter supplied by a competitor resulted in a very noisy and rough machining. When switching tools to our TINox NF cutter a smooth and machine-protecting machining operation was obtained. Additionally the indexable milling cutter had a tool life of only two shifts, then the inserts had to be replaced. It was therefore possible to cover the entire requirement with only one tool.

 
Social Media
Werkzeugdaten | EF Tool-Data
EF-Schnittdatenrechner
EF-Workshops 2017
Ausbildung & Karriere
Für den Ausbildungsbeginn September 2018 bitten wir um Bewerbung mit den entsprechenden Zeugnissen bis zum 30.09.2017

Die Ausbildungsplätze 2017 sind sowohl für den kaufmännischen Bereich als auch für den gewerblich-technischen Bereich besetzt.
ISO 9001:2008 Zertifikat